Outdoor Fire Pit Construction Plans71

Introduction

Enjoying the outdoors is a great way to relax and connect with nature. One way to make your outdoor experience even more enjoyable is to build a fire pit. A fire pit can provide light, warmth, and a place to gather with friends and family. It can also be a great way to cook food.

This guide will show you how to build a simple, yet stylish, outdoor fire pit using cinder blocks and concrete. This project is perfect for beginners and can be completed in a weekend.

Materials You'll Need
Concrete blocks: 24
Concrete mix: 2 bags
Sand: 1 bag
Gravel: 1/2 yard
Fire ring: 24 inches in diameter
Rebar: 4 pieces, 18 inches long
Chicken wire: 1 square yard
Masons trowel
Wheelbarrow
Shovel
Tape measure
Level

Step 1: Choose a Location

When choosing a location for your fire pit, keep the following in mind:
The fire pit should be located at least 10 feet away from any structures or flammable materials.
The fire pit should be located in a level area with good drainage.
The fire pit should be located in a place where you can enjoy it without being disturbed.

Step 2: Dig the Hole

Once you have chosen a location, it's time to dig the hole. The hole should be 18 inches deep and 30 inches in diameter.

Step 3: Level the Base

Once you have dug the hole, you need to level the base. To do this, fill the hole with sand and tamp it down until it is level.

Step 4: Set the Fire Ring

Place the fire ring in the center of the hole. The fire ring should be level and flush with the top of the hole.

Step 5: Place the Cinder Blocks

Begin placing the cinder blocks around the fire ring, leaving a 1-inch gap between each block. The first layer of blocks should be flush with the top of the hole.

Continue stacking the cinder blocks, staggering the joints as you go. The second layer of blocks should overlap the joints in the first layer. Continue stacking the blocks until you reach the desired height.

Step 6: Reinforce the Cinder Blocks

Once you have stacked the cinder blocks, you need to reinforce them with rebar. To do this, cut the rebar into 18-inch pieces. Then, insert the rebar into the holes in the cinder blocks. The rebar should be inserted into every other hole, both vertically and horizontally.

Step 7: Wrap the Cinder Blocks with Chicken Wire

Cut the chicken wire into squares that are large enough to wrap around the cinder blocks. Then, wrap the chicken wire around the cinder blocks, securing it with wire ties.

Step 8: Mix the Concrete

In a wheelbarrow, mix the concrete according to the manufacturer's instructions. The concrete should be a thick consistency, like peanut butter.

Step 9: Apply the Concrete

Apply the concrete to the chicken wire, using a mason's trowel. The concrete should be applied in a 1-inch layer.

Step 10: Let the Concrete Cure

Allow the concrete to cure for at least 24 hours before using the fire pit. During this time, keep the concrete moist by covering it with a tarp.

Enjoying Your Fire Pit

Once the concrete has cured, you can start enjoying your fire pit. It's important to remember to keep the fire small and supervised at all times. Always follow local fire safety regulations.

Building an outdoor fire pit is a great way to enhance your outdoor experience. With a little planning and effort, you can create a beautiful and functional fire pit that you and your family will enjoy for years to come.

2025-01-03

Previous：Thrilling Ski Adventures: A Captivating Compilation

Next：Outdoor Fishing Thrill: An Adventure in the Vast